Transport: Can be replaced with any Computer CD ROM drive (Remote Control, multistack or single play) with Digital Out and Play button. Also most DVD ROM drives (as they are being used only in a transport capacity, no sonic effects on signal). Easy to replace - as simple as replacing a drive in your computer. 
Note: Drives currently supplied with unit are not remote controllable. Full 7 year warranty on electronics other than CD ROM drive supplied  (3 mths warranty).

Digital to Analogue Converter: Ultra-high quality Burr-Brown I.C.s with Audiophile-grade support components.

Cabinet Finish: High gloss, solid Red Gum wood front panel, black gloss thick steel chassis & cover

Audio Output: Via gold RCA Connectors on rear

Technical Specifications: Burr-Brown PCM1710U Dual 20 bit Digital to Analogue converter. Complete Stereo DAC, 8x Oversampling Digital Filter, Multi level Delta-Sigma DAC, Analogue low pass filter, output amplifier. -92dB THD+Noise, 98dB Dynamic range, 110dB S-N. Accepts 16 or 20 bits input data. DATA re-clocking by Cirrus Logic using CS8412 I/C. Low-Jitter, on chip clock recovery. Supports AES/EUB, IEC958, S/PDIF, & EIAJ CP340 Professional & Consumer Formats. Final Audio Stage by Analog Devices AD712J Dual Precision, High speed, BiFET Op Amp. 30MHz min Unity gain.

Frequency Range: 0Hz-24KHz +/-.2dB (Burr-Brown p.15 Fig 15)

Signal to noise: 100dB +

Output Impedance: 100 ohms (matches 100 ohms to 100K ohms)

Power Requirements: 180-260 V ac 50/60 Hz via I.E.C. power socket on rear (Power cord not supplied)

Dimensions: 420mm (W) x 360mm (D) x 95mm (H) - 16.5in (W) x 14.2in (D) x 3.75in (H)

Shipping weight: 8.5 kg / 19 lb (8.2 kg/18lb cubic)

~ product design and specification subject to change without notice ~