Shopping Cart

AMPLIFOLIA RANGE

Showing 13–24 of 43 results

REDGUM RGSW8 Plate Amplifier

When you want the Subwoofer amplifier that other manufacturers choose.

Bass weight and Extension are the key words.

For installation in fixed installation, DIY or existing passive subwoofers.

REDGUM RGS Manna

First presented as the RGS28i, these are the little speakers that stunned them in England, even back in 1998. In fact, spontaneous ovations during Shows have been known to break out after their performance! Continuing as a 2-way, 2 driver system, they were re-designed internally as the RGSB Bookshelf Loudspeaker (christened Manna*) … using exclusively high-voltage metallized polypropylene caps … heavy 1mm wire for the bass coil … all connections silver soldered … and internal hook-up throughout with 12 AWG OFC copper. Handcrafted in Australia, they are not just a stunning looker with their gloss finish over real Red Gum wood veneer, but as well they amaze all who listen to them!

REDGUM RGSW7 Plate Amplifier

When you want the Subwoofer amplifier that other manufacturers choose.

Bass weight and Extension are the key words.

For installation in fixed installation, DIY or existing passive subwoofers.

REDGUM RGH900p Preamp/5.1 Processor

5.1 Home Theatre Preamplifier/Processor

Component of the “AVL Best Buy Award” Winner in 2007!

REDGUM’s proprietary 5.1 pre-amp / processor has been designed for use with both versions of our award-winning RGH900 6 channel amplifier.

REDGUM Stellulata (Integrated)

 

Nominally now the ‘baby’ of the family within the Amplifolia range, this little STELLULATA amplifier has had plenty of time to mature!

Back when the core REDGUM RGi35 design was upgraded to become the Signature Series RGi35ENR, even that move included the power supply and output stages from the ‘Best Buy Award’-winning RGi60, giving it plenty to ‘knock the socks off’ many 100W/ch mass production brand amplifiers!! Since then the RGi35ENR has put on a little more muscle, so what is now renamed as the Stellulata has a typical output of 60W/ch!!!

REDGUM RGiHF Headphone Amplifier

For that “up close and personal” experience – the REDGUM RGHF Headphone Amplifier is based on our RGi35 circuit design with substantial adaptation to the power supply.

This amplifier has also been modified to limit background noise to unprecedented “inky black” levels. Of all applications, a Headphone amplifier makes optimal use of Dual Volume controls as offered here – the volume level to each ear is chosen and provided in absolute isolation via each channel. Sound, “made to measure”, just as your RGHF will be “built to measure” to suit your headphone’s sensitivity … “up close and personal” from the start of its life!!

REDGUM Aggregata Stack

“Aggregata” by name; multi-tasking by nature!

To achieve a state of harmony in an all-digital world, your List of Wants&Needs adds up to time to …
dip your toe into the quality end of the DAC-pond
and
painlessly rip all your CDs onto file
as well as
be able to tune in to multiple sources of radio and streaming services.
plus
all these needing REDGUM’s “Stunning!” sound quality as their baseline.

One List. One tick … with the REDGUM Aggregata Stack.

REDGUM RGSW6 Plate Amplifier

When you want the Subwoofer amplifier that other manufacturers choose.

Bass weight and Extension are the key words.

For installation in fixed installation, DIY or existing passive subwoofers.

REDGUM Splendens/Stereo Passive Preamp

Who wouldn’t want a preamp to pass on exactly what is there!? Adding 0% distortion, 0% noise, and having signal to noise at infinity sounds like Audio perfection … when it comes from a Passive Preamp, that is.

When designing each REDGUM product, we have always made a firm, if not bold, statement about our seriousness by following only well-founded “fads/fashions/theories” that distinctly improve sound quality. (Ed. But that then means they are not fads, etc!) This stance can have its costs in market terms, but REDGUM remains resolute for the people out there with calibrated Ears … who don’t give a damn about such fads, etc., because they are seeking what Hi-End Audio is by definition – HiFi. You know, high fidelity.

REDGUM RGSW5 Plate Amplifier

When you want the Subwoofer amplifier that other manufacturers choose.

Bass weight and Extension are the key words.

For installation in fixed installation, DIY or existing passive subwoofers.

REDGUM RGPH2ENR Phono Preamp

So you want to play your vinyl again, but with a more serious approach to it all? The original little Phono Preamp (RGPH2) that was tested in Bound For Sound magazine and rated as equal top unit (with another brand costing several times the price!!) was just the starting point for this RGPH2ENR design.

So does it live up to the title of a Signature Series model? According to the Soundstage! Australia review , ” This baby stays solidly embedded within the context of my reference system.”

REDGUM Signature Series 5AWG ‘Expressive-Line’ Speaker Cable

To drill down into the core of your music,
you need the amp with core strength.
BUT
is all that core strength being passed on to the speakers?

The Core Promise of any Signature Series version of a REDGUM product is “More of the same” plus a big dash of “And then some!”.  This translates into a truly chunky 5AWG for our Signature Series ‘Expressive Line’ cable, with its 16 square millimetres of Australian copper, per core!
More-than-just-a promise is held within each core, with a further reduction by one-third of its electrical resistance, down to a very low 1.2mΩ/m.  Put another way in Tech-speak, this chunky twin-core cable is 342g/m of (511 x 0.2 x 2).  Definitely a Hi-Damping Factor cable!

Mined, milled & made in Australia, let it be the making of your speakers!

Newsletter